The Model P-100WM is the smallest of our filter press product line. This model is for crushing automotive and light truck filters.
The P-100WM is ideally suited for small to medium size maintenance shops where autos, vans, etc. are maintained. It is made to mount on a shop wall near the waste oil area.
A drain located directly below the crushing area allows the waste oil removed during the crushing process to be plumbed either into a drum or bulk tank. The rear of the unit is key-holed for easy installation.
Since you will already have a drum, the total extra space required for the machine is just 2 square feet.
Heavy Duty Truck Oil Filter Press.
“Multiple Crushing”, “Hands Free Operation”, “Self-contained” ,”Space Saving”, 110v or 220v options, and a 5 Year Limited Warranty:
The OBERG P-200L is the most popular model for crushing heavy duty truck filters. The P-200L accepts filters up to 41cm tall and crushes multiple automotive size filters at once.
Crushed filters are deposited through a trap door in the rear of the crushing chamber directly into a 205 ltr transport drum that can be positioned under the machine.
The P-200L requires no air supply and uses a fully self contained electric/hydraulic power unit. This system provides consistent crushing force without the need for any air supply. The user has total hands free operation. A push button control activates the system and a built-in safety mechanism prevents the machine from operating when the loading door is open.
The P-200L allows you to position your filter drum directly under the machine. The unique trap door allows the crushed filters to go directly into the transport drum without having to be manually removed.
Since you already have a drum, the total extra space required for the machine is just 2 square feet.
High Capacity Truck, Heavy Equipment, Industrial Oil Filter Press.
More Crushing Force “31 Tonnes Force”, “Self-contained”, “Space Saving”, 110v or 220v options and a 5 Year Limited Warranty:
The OBERG Model P-300L provides more crushing force than any competitor, crushing filters up to 51cm tall, multiple smaller filters at once, and oily shop rags.
The large crushing chamber also allows crushing 25 ltr. paint cans into thin wafers. With over 31 tonnes of crushing force, the P-300L removes the maximum oil possible from used filters! This eliminates the fabric mess and disposal problem typical when cutting filters.
Crushed filters are deposited through a trap door in the rear of the crushing chamber directly into a transport drum.
The P-300L includes legs to house two 205 ltr. drums under the machine. One drum can be used for crushed filters and the other for waste oil. A drain located under the crushing chamber allows for waste oil to be plumbed directly to a drum or bulk tank.
All operation is provided by a fully self-contained, electric/hydraulic power unit. This provides consistent crushing force without the need for high volume air supply, condensation filters and lubricators necessary with air units.
A push button control activates the system and a built in safety mechanism prevents the machine from operating when the loading door is open.
Two 55 gallon filter drums are positioned under the machine (not included). One drum holds the crushed filters, the other holds the waste oil. Or plumb waste oil direct to a bulk tank.
Trap door allows crushed filters to be deposited directly into the drum without having to be manually removed.
Total extra space required for the machine is 4 square feet.